alexa-stand
by
Edson O
Edson OALEXA STAND DARCK BADER
Comments (0)
Sign in to leave a comment
Project Tasks
20 planning tasks#1
Generate system requirement document
0m 43s0.05 cr used
Done#2
Generate personas & user flows
0m 6s0.05 cr used
Done#7
Create flow for Maker / Builder
0m 6sCredits in parent
Done#8
Create flow for Project Showcase Visitor
0m 6sCredits in parent
Done#9
Landing
5m 20sCredits in subtasks
Done#22
Fix Landing review finding: Q2 as reviewed now…
0m 48s0.02 cr used
Error#21
Fix Landing review finding: Q1 as reviewed now: Mobile spec content is clipped at the…
0m 37s0.02 cr used
Done#20
Fix Landing review findings: Mobile spec panel content is clipped at the left viewport… (+1 more)
0m 35s0.02 cr used
Done#19
Fix Landing: The required hero photograph of the matte-black Darth Vader Alexa stand is replaced by…
2m 5sCredits unavailable
Error#14
Landing / Navigation
0m 0s0.85 cr used
Done#11
Landing / Hero
0m 32s0.85 cr used
Done#12
Landing / Spec Panel
0m 36s0.85 cr used
Done#13
Landing / Guide Route
0m 23s0.85 cr used
Done#15
Landing / Footer
0m 0s0.85 cr used
Done#18
Fix Landing: Mobile spec panel content is clipped at the left viewport edge (Landing Spec Panel.jsx…
2m 15sCredits unavailable
Done#16
Navigation
0m 19sCredits in parent
Done#17
Footer
0m 23sCredits in parent
Done#10
Build Guide
Credits in subtasks
Backlog#5
Architecture
0.05 cr needed
Backlog#6
Workspace task plan
0.05 cr needed
Backlog
SPEC
Amazon
Speaker Stand
- DIMENSIONS
- 180 × 120 × 210 mm
- FILAMENT
- PLA Matte Black, 1.75 mm
- PRINT TIME
- 14 h
ABOUT THE BUILD
This is a Darth Vader–themed stand for an Alexa smart speaker, presented as a build guide with design files and step-by-step instructions. Browse the finished build, then print the parts and follow along.
BUILD GUIDE08 steps · design files · print settings
SPEC
Amazon
Speaker Stand
- DIMENSIONS
- 180 × 120 × 210 mm
- FILAMENT
- PLA Matte Black, 1.75 mm
- PRINT TIME
- 14 h
ABOUT THE BUILD
This is a Darth Vader–themed stand for an Alexa smart speaker, presented as a build guide with design files and step-by-step instructions. Browse the finished build, then print the parts and follow along.
BUILD GUIDE08 steps · design files · print settings
No comments yet. Be the first!