Thief Prevention is a premises intrusion-prevention system for Kumar Palani (IN). Its intent is to stop a theft before it happens: detect intruders inside the premises and on the outer premises, raise early detection alerts so the event can be stopped as early as possible, trap intruders so they cannot complete a theft, and integrate the premises system with all police stations so risk is mitigated beyond the premises boundary. The system must also keep hackers out of its networks.
The audience is two active human roles: the Premises Security Operator, who watches inside and outer premises and acts on early alerts, and the Police Station Responder, who receives integrated intrusion events at their police station and acts on them to mitigate risk. The product is delivered as a first-party web application with application-owned identity, background detection automation, and outbound delivery of intrusion events to police stations.
Thief Prevention is a single first-party web application backed by one shared API service. Detection runs as background automation over premises sensor inputs; the operator sees the resulting zone status and early alerts in the application, and the system delivers intrusion events outward to the responsible police station, where the responder sees and acts on them in the same application.
Access is application-owned. A new premises operator enrolls through Sign Up; a police responder is provisioned to a station before first sign-in and then verifies at Login. Landing is public and explains the product before sign-in. Dashboard, Alerts, and Police Events are protected, role-restricted working surfaces: the operator works in Dashboard and Alerts, the responder works in Police Events. Identity continuity exists so that premises state, alert history, and police event history remain bound to the correct operator and the correct station.
Current scope covers inside-premises and outer-premises detection, early alerting, intruder trapping, police station integration, and network protection against hackers. Nothing in this document extends to general building management, guard rostering, or unrelated account administration.
Not applicable — no reference directive supplies a content_source.
FR-1 — Detect intruders inside the premises. As a Premises Security Operator I should have the system detect intruders inside the premises so that an intrusion is identified before a theft occurs. Provenance: explicit. Trigger: sensor input from an inside zone. Result: an intrusion detection recorded against that zone and premises, visible on Dashboard and Alerts. Failure/recovery: if a zone's sensor input is unavailable, the zone is shown as unmonitored on Dashboard rather than as clear. Continuation: the detection feeds FR-2.
FR-2 — Detect intruders on the outer premises. As a Premises Security Operator I should have the system detect intruders on the outer premises so that an approach is identified before entry. Provenance: explicit. Trigger: sensor input from an outer zone. Result: an intrusion detection recorded against that outer zone, visible on Dashboard and Alerts. Failure/recovery and continuation as FR-1.
FR-3 — Raise early detection alerts. As a Premises Security Operator I should receive an early alert as soon as an intrusion is detected so that the event can be stopped as early as possible. Provenance: explicit. Trigger: a detection from FR-1 or FR-2. Result: a live alert row appears on Dashboard and in Alerts with zone, time, and live marking. Failure/recovery: if the alert cannot be surfaced, the operator sees a refresh error with retry and the last-known state marked stale. Continuation: the operator opens the alert (FR-4) and the event is dispatched to police (FR-6).
FR-4 — Review an alert and its evidence. As a Premises Security Operator I should open an alert and see its zone, time, and detection evidence so that I can decide how to act. Provenance: required_inference. Trigger: operator selects an alert. Result: alert detail with detection evidence and current trap and dispatch state. Failure/recovery: detail load failure shows an error with retry while the alert remains listed. Continuation: acknowledge (FR-5) or trap (FR-7).
FR-5 — Acknowledge an alert. As a Premises Security Operator I should acknowledge a live alert so that the response state is recorded and the event is not left unattended. Provenance: required_inference. Trigger: operator acknowledges. Result: the alert's state changes to acknowledged with the acknowledging operator and time recorded. Failure/recovery: a failed acknowledgement leaves the alert live and offers retry. Continuation: the operator proceeds to trap or monitors until resolved.
FR-6 — Dispatch intrusion events to police stations. As a Premises Security Operator I should have each intrusion event delivered to the responsible police station so that risk is mitigated beyond the premises. Provenance: explicit (integration with all police stations). Trigger: a detection from FR-1 or FR-2. Result: an intrusion event is delivered to the police station responsible for the premises and appears in that station's Police Events. Failure/recovery: a failed delivery is shown on the alert as not delivered, with retry; the operator can see delivery status per alert. Continuation: the responder acts (FR-8, FR-9).
FR-7 — Trap the intruder. As a Premises Security Operator I should trigger the trap for an active intrusion so that the intruder cannot complete the theft. Provenance: explicit. Trigger: operator triggers the trap on an active alert. Result: the trap is engaged for that zone and the alert shows trap engaged with operator and time. Failure/recovery: a failed trap engagement leaves the alert in its prior state with an error and retry, and the failure is visible on the alert. Continuation: the operator monitors the trapped event until police response or resolution.
FR-8 — Receive intrusion events at the police station. As a Police Station Responder I should see intrusion events delivered to my station so that I can act on the event. Provenance: explicit (integration with all police stations). Trigger: delivery from FR-6. Result: the event appears in Police Events for the responder's station only. Failure/recovery: if the list cannot refresh, the responder sees a stale indicator with retry. Continuation: open the event (FR-9).
FR-9 — Respond to an intrusion event. As a Police Station Responder I should open an event and mark it responded so that the premises operator and the record show police action was taken. Provenance: required_inference. Trigger: responder marks responded. Result: the event records responded state with responder and time, and the premises alert shows police response recorded. Failure/recovery: a failed update leaves the event unhandled with an error and retry. Continuation: the event remains in the station's history.
FR-10 — Keep hackers out of the networks. As the system owner I should have the system's networks protected so that hackers cannot enter them. Provenance: explicit. Trigger: any inbound access attempt to application, API, or service networks. Result: only authenticated, authorized sessions reach protected surfaces; unauthenticated requests are rejected; service-to-service traffic is confined to the internal network. Failure/recovery: rejected attempts are logged and do not alter premises or event state. Continuation: legitimate operator and responder sessions are unaffected.
FR-11 — Enroll a new premises operator. As a new Premises Security Operator I should complete self-service enrollment so that I can start monitoring my premises. Provenance: required_inference. Trigger: operator submits Sign Up. Result: operator account and premises created; operator proceeds to first sign-in. Failure/recovery: validation and duplicate-account errors with correction path. Continuation: Login → Dashboard.
FR-12 — Provision a police responder to a station. As a Police Station Responder I should be provisioned to my station before first sign-in so that I only see my station's events. Provenance: required_inference. Trigger: station provisioning of the responder account. Result: the responder account is bound to exactly one police station. Failure/recovery: an unprovisioned responder signing in sees an instruction to contact the station administrator. Continuation: Login → Police Events.
FR-13 — Verify a returning operator or responder. As a returning Premises Security Operator or Police Station Responder I should verify at Login so that I resume my own premises or station state. Provenance: required_inference. Trigger: credentials submitted at Login. Result: role-resolved entry to Dashboard (operator) or Police Events (responder). Failure/recovery: invalid credentials show an error with retry. Continuation: the actor's working surface.
Muse: Massimo Vignelli — systematic clarity; the product reads as a coded control map, not a template.
#F4F1EA (warm paper ground); surface #FFFFFF (data panels); text #111111; primary #D7261E (live intrusion, inside zones, live-event left rule); accent #F2C200 (outer premises zones); muted #5A5A5A (secondary labels, timestamps).clamp() so text stays whole at 375/768/1280px.The public entry is a full-width schematic premises map filling the right two thirds in red inside-zone blocks and yellow outer-zone blocks, drawn as flat coded rectangles separated by hairline rules. Over the paper ground on the left sits a stacked black uppercase headline scaling from 48px to 96px, spanning edge to edge, with the black CTA bar "Enroll premises" pinned directly beneath it. Zone labels sit in small caps with a colour chip before each name, so the map reads as a legend for the product itself. The gesture is carried entirely by the map and rules; the headline, subline, and CTA stay whole and uncovered at every viewport.
Interaction Model: Static (direction) Motion Tempo: still Hero Dimensionality: flat
Landing Hero Motion Brief
[Default — not specified by user][required_inference][required_inference]No completed page designs yet.
Completed design pages will appear here when they are ready to preview.
No completed page designs yet.
Completed design pages will appear here when they are ready to preview.
No comments yet. Be the first!