Recovery Pipeline
NOT CONNECTED- ConnectManual step
- DetectAwaiting source
- EvidenceNone collected
- DraftNo drafts
- ApproveHuman approval on
- SendNo provider linked
Verified Outcome
Awaiting first eventAwaiting first verified event

Revenue recovery infrastructure
Recover missed leads, forgotten follow-ups, abandoned opportunities and inactive customers using your business’s real data.
Verified Outcome
Awaiting first eventAwaiting first verified event
Missed leads, forgotten follow-ups, abandoned opportunities and inactive customers are not lost because nobody cared. They are lost because they are sitting in records no system is watching, where nothing surfaces them again once the moment passes.
RecoverOS reads the records you already own — your own customer, deal, order and message history — and turns the ones that went quiet into something a person can act on.
These are detected only when real connected data supports them — an opportunity is never created from an assumption.
No real business data connected yet.
Connect a source to populate this plate. Values shown are placeholders for the empty state — RecoverOS never displays an estimate as verified revenue.
Connect a sourceAI agents
Each agent works only on data you have authorized. When evidence is missing it returns INSUFFICIENT DATA, and when it needs a credential it returns SETUP REQUIRED. No agent on this page is executed here — these are the six registers you can run from inside the application.
Analyze authorized business data and find possible lost-revenue opportunities.
Create factual customer context using authorized data only.
Create personalized recovery email/message drafts from real customer context.
Manage approved follow-up sequences and stop after unsubscribe, bounce, negative response or manual stop.
Calculate opportunity values from real records. Never call estimated value verified revenue.
Check approval, suppression list, unsubscribe status, duplicate contact, sending limits and available evidence before communication.
Agents are described here, not executed — this public surface offers no run control and reports no run counts or success rates. Open the AI Agents page in the application to review runs against your connected data.
Ten real sources you can connect. RecoverOS reads only what you authorise, and reports each source at its true state.
CONNECTED appears only after a real, successful connection — never before. Where a credential or API key is missing, the source stays SETUP REQUIRED until it is supplied. Nothing is imported, sent or counted on a source that has not genuinely connected.
Built for operators who already hold customer records but have no system watching them.
Storefront, checkout, order and payment records.
Client pipelines, proposals and stale follow-ups.
Enquiries, quotes and inactive repeat customers.
E-commerce recovery types supported
Each recovery type is created only when real connected data supports it. With no evidence behind it, the opportunity is not raised at all.
Dashboard
This is the real product surface, not a marketing mock. Every value is read from your own connected records — and when nothing is connected, every card says so instead of showing a zero.
No real business data connected yet.
RecoverOS works from your real business records, so the rules about those records are part of the product rather than a promise attached to it. Below is the accepted posture and the integrity rules that govern every message the system touches.
Every credential and endpoint is supplied through environment variables. Application code reads configuration at runtime; it never carries a value.
Passwords, API keys and OAuth tokens live only on the server and are never returned to a browser. No secret is written into frontend code.
Every request is authorized against the signed-in session and its organization before any record is read or written.
One organization can never read another organization’s data. Tenant scope is applied at the data layer, not in the interface.
Records, identifiers and imported rows are validated before they are accepted, and rejected rows are reported rather than silently dropped.
OAuth connections are established and refreshed server-side. Inbound webhooks are verified before their payload is trusted.
Approval is ON by default. No message leaves the system without a person approving that specific draft.
No message is shown as sent unless the real email provider confirms it. Delivery, bounce and unsubscribe are recorded from provider events.
A suppressed contact blocks communication. An unsubscribed, bounced or duplicate address cannot be written to.
No passwords, API keys or OAuth tokens appear in frontend code — not in markup, not in requests, not in storage.
Where a credential or connection is absent, the surface states it plainly instead of simulating a result.
This page states posture only. It carries no certifications, seals or audit assurances, and no access on this site is gated by a role.
Estimated opportunity value is never reported as verified revenue. Verified revenue is recorded only from a provider-confirmed event.
Two ways to run RecoverOS. The starting path is free and needs no card, because nothing is charged for reading your own data. Commercial pricing for the organization plan is not published yet — when it is, it will appear here as a real figure, not a placeholder.
The scan reads your own connected records and reports what it finds. No amount is charged and no card is required to begin.
Start Free Recovery ScanThis is the entry path: connect a real source, let detection run, and review the evidence before anything is sent.
Organization pricing is not published yet. No figure, discount or guarantee is shown here until a real commercial rate exists.
Start Free Recovery ScanStart on the free entry path and revisit this column once pricing is published.
RecoverOS never reports a recovered amount it cannot evidence. Until a real connected record backs an outcome, the dashboard shows no value at all.
Review the real data connectionsFAQ
What RecoverOS reads, what it will not do, and what it reports when the evidence is not there.
Detection runs only on data your organization has explicitly connected and authorized — imported CSV records, connected CRM or commerce sources, or records synced through the REST API and webhooks.
The Opportunity Detector reads those records, looks for signals such as an abandoned cart, an unanswered lead, an overdue follow-up or an inactive customer, and raises an opportunity. Every opportunity keeps a link back to the raw source records that produced it.
No source records are analyzed until a connection is authorized for your organization.Start with a CSV import — the minimum fields are Name, Email, Company, Last Contact, Status, Deal Value, Last Message, Customer ID and Order ID — or connect a supported source such as Google Sheets, Gmail, HubSpot, Pipedrive, Salesforce, Shopify, WooCommerce, a REST API or a webhook.
Imports validate as they run: duplicates are skipped, invalid email addresses are rejected, and the import reports how many records were imported, skipped and errored.
SETUP REQUIRED
A source that needs credentials will not report CONNECTED until the real connection succeeds.No. Human approval is ON by default. RecoverOS prepares the customer context, the recommended action and a message draft; nothing is sent until a person approves that specific draft.
The Compliance Guard checks approval, the suppression list, unsubscribe status, duplicate contacts, sending limits and available evidence before any communication is released. A message is never marked Sent unless the real provider confirms the send, and its message ID, timestamp, delivery status, bounce and unsubscribe are recorded when the provider returns them.
APPROVAL REQUIRED BY DEFAULT
The Follow-up Agent stops a sequence on unsubscribe, bounce, a negative response or a manual stop.RecoverOS does not invent evidence or customer information. When the source records needed to support a claim are not present or are incomplete, the result is returned as insufficient data rather than a guess.
The Revenue Analyzer calculates opportunity value from real records only. An estimated opportunity value is never reported as verified recovered revenue — verified revenue requires a real, confirmed outcome event.
INSUFFICIENT DATA
The same rule applies to agent runs: missing evidence stops the run at that step instead of producing a fabricated answer.Yes. RecoverOS is multi-tenant by design: every customer, contact, lead, opportunity, message, deal, order, invoice, campaign, agent run, integration, email event, suppression entry, audit record and setting belongs to an organization, and access is scoped to your organization membership.
Secrets are held server-side. Passwords, API keys and OAuth tokens are never exposed in frontend code, webhooks are verified, and input validation is applied before data is written.
TENANT ISOLATION
One organization can never read another organization’s records.Demo mode is an explicitly labelled preview that uses sample records so the interface can be evaluated without connecting a real source. Any surface showing demo data displays the label DEMO MODE — DATA IS NOT REAL.
Demo data is kept isolated from production records and the two are never mixed. Verified recovered revenue, connected sources and email outcomes are only ever reported from your real connected data.
DEMO MODE — DATA IS NOT REAL
Clearing demo mode leaves the workspace empty until a real source is connected.Get started
Recover missed leads, forgotten follow-ups, abandoned opportunities and inactive customers using your business’s real data.
Human approval stays ON by default. RecoverOS reports a recovered revenue figure only from a real, confirmed outcome event — estimated opportunity value is never presented as verified revenue. Any source awaiting credentials shows SETUP REQUIRED; missing evidence returns INSUFFICIENT DATA.

Revenue recovery infrastructure
Recover missed leads, forgotten follow-ups, abandoned opportunities and inactive customers using your business’s real data.
Verified Outcome
Awaiting first eventAwaiting first verified event
Missed leads, forgotten follow-ups, abandoned opportunities and inactive customers are not lost because nobody cared. They are lost because they are sitting in records no system is watching, where nothing surfaces them again once the moment passes.
RecoverOS reads the records you already own — your own customer, deal, order and message history — and turns the ones that went quiet into something a person can act on.
These are detected only when real connected data supports them — an opportunity is never created from an assumption.
No real business data connected yet.
Connect a source to populate this plate. Values shown are placeholders for the empty state — RecoverOS never displays an estimate as verified revenue.
Connect a sourceAI agents
Each agent works only on data you have authorized. When evidence is missing it returns INSUFFICIENT DATA, and when it needs a credential it returns SETUP REQUIRED. No agent on this page is executed here — these are the six registers you can run from inside the application.
Analyze authorized business data and find possible lost-revenue opportunities.
Create factual customer context using authorized data only.
Create personalized recovery email/message drafts from real customer context.
Manage approved follow-up sequences and stop after unsubscribe, bounce, negative response or manual stop.
Calculate opportunity values from real records. Never call estimated value verified revenue.
Check approval, suppression list, unsubscribe status, duplicate contact, sending limits and available evidence before communication.
Agents are described here, not executed — this public surface offers no run control and reports no run counts or success rates. Open the AI Agents page in the application to review runs against your connected data.
Ten real sources you can connect. RecoverOS reads only what you authorise, and reports each source at its true state.
CONNECTED appears only after a real, successful connection — never before. Where a credential or API key is missing, the source stays SETUP REQUIRED until it is supplied. Nothing is imported, sent or counted on a source that has not genuinely connected.
Built for operators who already hold customer records but have no system watching them.
Storefront, checkout, order and payment records.
Client pipelines, proposals and stale follow-ups.
Enquiries, quotes and inactive repeat customers.
E-commerce recovery types supported
Each recovery type is created only when real connected data supports it. With no evidence behind it, the opportunity is not raised at all.
Dashboard
This is the real product surface, not a marketing mock. Every value is read from your own connected records — and when nothing is connected, every card says so instead of showing a zero.
No real business data connected yet.
RecoverOS works from your real business records, so the rules about those records are part of the product rather than a promise attached to it. Below is the accepted posture and the integrity rules that govern every message the system touches.
Every credential and endpoint is supplied through environment variables. Application code reads configuration at runtime; it never carries a value.
Passwords, API keys and OAuth tokens live only on the server and are never returned to a browser. No secret is written into frontend code.
Every request is authorized against the signed-in session and its organization before any record is read or written.
One organization can never read another organization’s data. Tenant scope is applied at the data layer, not in the interface.
Records, identifiers and imported rows are validated before they are accepted, and rejected rows are reported rather than silently dropped.
OAuth connections are established and refreshed server-side. Inbound webhooks are verified before their payload is trusted.
Approval is ON by default. No message leaves the system without a person approving that specific draft.
No message is shown as sent unless the real email provider confirms it. Delivery, bounce and unsubscribe are recorded from provider events.
A suppressed contact blocks communication. An unsubscribed, bounced or duplicate address cannot be written to.
No passwords, API keys or OAuth tokens appear in frontend code — not in markup, not in requests, not in storage.
Where a credential or connection is absent, the surface states it plainly instead of simulating a result.
This page states posture only. It carries no certifications, seals or audit assurances, and no access on this site is gated by a role.
Estimated opportunity value is never reported as verified revenue. Verified revenue is recorded only from a provider-confirmed event.
Two ways to run RecoverOS. The starting path is free and needs no card, because nothing is charged for reading your own data. Commercial pricing for the organization plan is not published yet — when it is, it will appear here as a real figure, not a placeholder.
The scan reads your own connected records and reports what it finds. No amount is charged and no card is required to begin.
Start Free Recovery ScanThis is the entry path: connect a real source, let detection run, and review the evidence before anything is sent.
Organization pricing is not published yet. No figure, discount or guarantee is shown here until a real commercial rate exists.
Start Free Recovery ScanStart on the free entry path and revisit this column once pricing is published.
RecoverOS never reports a recovered amount it cannot evidence. Until a real connected record backs an outcome, the dashboard shows no value at all.
Review the real data connectionsFAQ
What RecoverOS reads, what it will not do, and what it reports when the evidence is not there.
Detection runs only on data your organization has explicitly connected and authorized — imported CSV records, connected CRM or commerce sources, or records synced through the REST API and webhooks.
The Opportunity Detector reads those records, looks for signals such as an abandoned cart, an unanswered lead, an overdue follow-up or an inactive customer, and raises an opportunity. Every opportunity keeps a link back to the raw source records that produced it.
No source records are analyzed until a connection is authorized for your organization.Start with a CSV import — the minimum fields are Name, Email, Company, Last Contact, Status, Deal Value, Last Message, Customer ID and Order ID — or connect a supported source such as Google Sheets, Gmail, HubSpot, Pipedrive, Salesforce, Shopify, WooCommerce, a REST API or a webhook.
Imports validate as they run: duplicates are skipped, invalid email addresses are rejected, and the import reports how many records were imported, skipped and errored.
SETUP REQUIRED
A source that needs credentials will not report CONNECTED until the real connection succeeds.No. Human approval is ON by default. RecoverOS prepares the customer context, the recommended action and a message draft; nothing is sent until a person approves that specific draft.
The Compliance Guard checks approval, the suppression list, unsubscribe status, duplicate contacts, sending limits and available evidence before any communication is released. A message is never marked Sent unless the real provider confirms the send, and its message ID, timestamp, delivery status, bounce and unsubscribe are recorded when the provider returns them.
APPROVAL REQUIRED BY DEFAULT
The Follow-up Agent stops a sequence on unsubscribe, bounce, a negative response or a manual stop.RecoverOS does not invent evidence or customer information. When the source records needed to support a claim are not present or are incomplete, the result is returned as insufficient data rather than a guess.
The Revenue Analyzer calculates opportunity value from real records only. An estimated opportunity value is never reported as verified recovered revenue — verified revenue requires a real, confirmed outcome event.
INSUFFICIENT DATA
The same rule applies to agent runs: missing evidence stops the run at that step instead of producing a fabricated answer.Yes. RecoverOS is multi-tenant by design: every customer, contact, lead, opportunity, message, deal, order, invoice, campaign, agent run, integration, email event, suppression entry, audit record and setting belongs to an organization, and access is scoped to your organization membership.
Secrets are held server-side. Passwords, API keys and OAuth tokens are never exposed in frontend code, webhooks are verified, and input validation is applied before data is written.
TENANT ISOLATION
One organization can never read another organization’s records.Demo mode is an explicitly labelled preview that uses sample records so the interface can be evaluated without connecting a real source. Any surface showing demo data displays the label DEMO MODE — DATA IS NOT REAL.
Demo data is kept isolated from production records and the two are never mixed. Verified recovered revenue, connected sources and email outcomes are only ever reported from your real connected data.
DEMO MODE — DATA IS NOT REAL
Clearing demo mode leaves the workspace empty until a real source is connected.Get started
Recover missed leads, forgotten follow-ups, abandoned opportunities and inactive customers using your business’s real data.
Human approval stays ON by default. RecoverOS reports a recovered revenue figure only from a real, confirmed outcome event — estimated opportunity value is never presented as verified revenue. Any source awaiting credentials shows SETUP REQUIRED; missing evidence returns INSUFFICIENT DATA.
No comments yet. Be the first!